Sherlock is back this summer for lateSEOrush

lateSEOrush-sherlock

lateSEOrush-sherlock

It may be frustrating for Sherlock fans to have to wait two years between new episodes of the incredibly popular BBC show – thanks to the success of its stars, Benedict Cumberbatch (Doctor Strange) and Martin Freeman (The Hobbit) – but there’s something about waiting so long that kicks the anticipation up a notch or two. New Sherlock episodes have becomes something of an event experience, not unlike new installments of a major movie franchise – your Star Wars or your Harry Potters or your Lord of the Rings, for example.

Filming is currently taking place for the next Sherlock episode – believed to be a Christmas special airing at the end of 2015 – and it features Cumberbatch and Freeman looking much the same as they did in the previously released official image (above). As you can see, Sherlock and Watson are wearing Victorian attire that harkens back to the Sherlock Holmes adaptations of yore – the Basil Rathbone movies, the Peter Cushing movie, the Jeremy Brett TV series, among others.

The Sherlock special episode – probably a Christmas special – will debut near the end of 2015.

Advertisements

Tips on blogging to help in lateSEOrush

Some tips on blogging to help in lateSEOrush

The three basic steps of brand building are consistency, persistence, and restraint, and you need to use all three to communicate your brand image and identity on your blog. Your brand is a promise to your audience, and you need to keep that promise through every part of your blog. If you fail to keep your brand promise, visitors will turn away from your brand and your blog in search of one that does consistently meet their expectations.

Building a brand is a multi-step process, and it starts with developing a foundation. Your blog is a fundamental part of that foundation, because it’s one of the places where you can control your brand image and identity while connecting with a large audience. Build it with your brand in mind using the tips below..

1.  Colors

Is your blog about babies or the stock market? Is your target audience women or men? Is your brand playful, cutting-edge, sophisticated, or highly professional?

Your answers to these questions will help you choose the best color palette for your blog that represents your brand personality while appealing to the right target audience. For example, a blog about baby products would work well using pastel pinks and blues, but the same color palette would not communicate the highly-professional image that a stock trader’s blog should.

Consider color psychology as you choose your brand and blog color palette. Follow brand design tips which say you should choose one or two primary colors and one or two secondary colors. Sticking to three colors in the design of your main blog elements will allow you to call attention to important areas of your blog without cluttering the page and making it confusing for visitors.

Save Your Baby’s Umbilical Cord With Lifecell Now at Only Rs 19,990
Master the Skills Employers Want. Earn a Nanodegree-Enroll by Feb 10

2.  Images

Just as colors can communicate your brand image, so can the images that you use on your blog. Of course, you need to chooseimages that you’re legally allowed to use on your blog, but you also need to think about how images affect your audience’s perceptions of your brand.

Cute cartoons wouldn’t work on a legal blog while photos of people in suits and ties wouldn’t work on a blog about gardening. Those images would be inconsistent with what the audience expects from the brand.

3.  Fonts

Fonts are tricky because making a mistake and choosing a font that doesn’t match your brand could negatively affect the user experience on your blog. For example, a blog about preschool education might use a fun font that looks like chalkboard writing, handwriting, or cartoon writing. However, those creative fonts are very difficult to read in long blocks of text and can be particularly illegible at small sizes, which people will see when they view your blog on mobile devices.

Save the highly stylized fonts for special headers and stick with web-friendly, easy-to-read fonts within your content.

Start Earning from First Month! Low Investment High Return.
Reliable & Secure-Free 24/7 Support Free Phone Support, Setup & More
[-Oxford-/E+/Getty Images].

4.  Layout and Navigation

Blog design offers a great deal of flexibility in terms of layout and navigation, but the most important thing to remember is that you need to balance your brand image with user experience.

For example, infinite scroll is very popular on blogs these days, but for the wrong brand, infinite scroll could frustrate visitors. Similarly, your brand might be cutting-edge, but visitors to your blog still have basic expectations for where they’ll find common elements such as your About page, Contact page, and so on. Meet their expectations so they don’t get confused or frustrated and leave your blog never to return again.

Also, pay close attention to your blog’s sidebar and footer. These are perfect places to inject your brand personality through not only the type of content you offer in these areas but also how you offer it. For example, you can create images to promote popular posts in your sidebar rather than simply offering a list of popular post titles. You can create a feed subscription sign up form that uses the colors, fonts, and images that match your brand rather than just embedding a standard subscription icon.

Sidebars, footers, and headers can be used to highlight your brand image, so be sure to leverage them for that purpose!

[LdF/E+/Getty Images].

5.  Content

Your blog’s colors, fonts, images, and layout offer a first impression of your brand that is critical to attract, engage, and keep visitors, but none of that will matter if your content is inconsistent and confusing to them based on the expectations that your colors, fonts, images, and layout have created in their minds.

Your content, your voice, and your style are equally important, and they must consistently communicate your brand promise and image. There are a lot of blogs out there that can meet their needs and expectations, so don’t let your audience get away by confusing, frustrating, or disappointing them.

Your blog’s brand extends beyond your blog design. It lives within your content as well. Be consistent, be persistent, and exercise restraint so your brand and your blog have a chance to grow and thrive.

lets review Docker at lateSEOrush

lateseorush-docker

lateseorush-docker

This is the lateSEOrush docker

It’s been just over a year since my last review of Docker, heavily criticising it’s flawed architectural design and poor user experience. The project has since matured into 1.0 and gained some notoriety from Amazon, but has suffered growing user frustration, hype accusations and even breakout exploits leading to host contamination. However the introduction of private repos in Docker Hub, which eliminated the need to run your own registry for hosted deployments, coupled with webhooks and tight Github build integrations, looked to be a promising start.

So I decided to give Docker another chance and put it into production for 6 months. The result was an absolute shit show of abysmal performance, hacky workarounds and rage inducing user experience which left me wanting to smash my face into the desk. Indeed performance was so bad, that disabling caching features actually resulted in faster build times.

[edit]: On the surface, Docker has a lot going for it. It’s ecosystem is encouraging developers towards a mindset of immutable deployments, and starting new projects can be done quickly and easily, something which many people find useful. However it’s important to note that this article focuses on the daily, long term usage of Docker, both locally and in production. If you expect anything positive from Docker, or its maintainers, then you’re shit outta luck.

Dockerfile

Dockerfile has numerous problems, it’s ugly, restrictive, contradictory and fundamentally flawed. Lets say you want to build multiple images of a single repo, for example a second image which contains debugging tools, but both using the same base requirements. Docker does not support this (per #9198), there is no ability to extend a Dockerfile (per #735), using sub directories will break build context and prevent you using ADD/COPY (per #2224), as would piping (per #2112), and you cannot use env vars at build time to conditionally change instructions (per #2637).

Our hacky workaround was to create a base image, two environment specific images and some Makefile automation which involved renaming and sed replacement. There are also some unexpected “features” which lead to env $HOME disappearing, resulting in unhelpful error messages. Absolutely disgusting.

Docker cache/layers

Docker has the ability to cache Dockerfile instructions by using COW (copy-on-write) filesystems, similar to that of LVM snapshots, and until recently only supported AuFS, which has numerous problems. Then in release 0.7 different COW implementations were introduced to improve stability and performance, which you can read about in detail here.

However this caching system is unintelligent, resulting in some surprising side effects with no ability to prevent a single instruction from caching (per #1996). It’s also painfully slow, to the point that builds will be faster if you disable caching and avoid using layers. This is exacerbated by slow upload/download speeds performance in Docker Hub, detailed further down.

These problems are caused by the poor architectural design of Docker as a whole, enforcing linear instruction execution even in situations where it is entirely inappropriate (per #2439). As a workaround for slow builds, you can use a third party tool which supports asynchronous execution, such as Salt Stack, Puppet or even bash, completely defeating the purpose of layers and making them useless.

Docker Hub

Docker encourages social collaboration via Docker Hub which allows Dockerfiles to be published, both public and private, which can later be extended and used by other users via FROM instruction, rather than copy/pasting. This ecosystem is akin to AMIs in AWS marketplace and Vagrant boxes, which in principle are very useful.

However the Docker Hub implementation is flawed for several reasons. Dockerfile does not support multiple FROM instructions (per #3378, #5714 and #5726), meaning you can only inherit from a single image. It also has no version enforcement, for example the author of dockerfile/ubuntu:14.04 could replace the contents of that tag, which is the equivalent of using a package manager without enforcing versions. And as mentioned later in the article, it has frustratingly slow speed restrictions.

Docker Hub also has an automated build system which detects new commits in your repository and triggers a container build. It is also completely useless for many reasons. Build configuration is restrictive with little to no ability for customisation, missing even the basics of pre/post script hooks. It enforces a specific project structure, expecting a single Dockerfile in the project root, which breaks our previously mentioned build workarounds, and build times were horribly slow.

Our workaround was to use CircleCI, an exceptional hosted CI platform, which triggered Docker builds from Makefile and pushed up to Docker Hub. This did not solve the problem of slow speeds, but the only alternative was to use our own Docker Registry, which is ridiculously complex.

lateSEOrush-google satellite to be launched by ISRO

In case you forgot about lateSEOrush, a new unrelated post

lateSEOrush-isro

ISRO

The Indian Space Research Organisation will be launching a satellite for Google’s Sky Box Imaging for GPS maps this year from its spaceport at Sriharikota.

This will be the first US satellite to be launched by Isro.

Google, which has acquired the satellite imaging company Sky Box Imaging, wants to develop precision maps using its own network of 180-odd satellites.

The first among them is Sky Sat Gen II. Sky Box had entered into an agreement with Antrix Corporation before its takeover to launch the 120-kg satellite. It will be flown as a co-passenger along with the main payload during one of the satellite launchings this year. According to senior officials involved in space research, Google is keen on making use of Skybox satellites to keep Google Maps closer to real-time, accurate with up-to-date imagery.

Google is also keen on using Skybox’s team and technology to help improve Internet access and disaster relief, the areas in which the company has long been interested.

Shar director Dr M.Y.S. Prasad said that Sky Box Imaging had approached them to launch one of its satellites and had also informed that they had plans to place 180 micro satellites in orbit. “They may launch experimental satellites before going ahead. Although they want to us to launch a single satellite now, there is potential in future. This is the first US-based satellite being launched by Isro,” Dr Prasad said.

And incase you have forgotten, http//advaita.iiit-bh.ac.in

lateseorush-INDOCUSTOMZ

Hello everyone…have you checked out indocustomz yet??

lateSEOrush-indocustomz

Aiming to be the leading online clothing merchandise, Indocustomz was launched recently. It serves as an excellent market for customized T-shirts, Hoodies and Jackets for schools, colleges, Industries and Companies all over the country. They will also provide Tailor-made clothing for events and fests.

And the COO of the brand is none other than Manas Kumar Rout.

lateseorush-manas

Yes, he is short

So like, share and comment…

https://www.indocustomz.com/